Bontrager SPEED LIMIT ROAD BRAKESETS Owner's Manual download pdf (Page 14)

12 TREK SERVICE INFORMATION 24 May 2010

Front Brake

The front brake on the Speed Concept bike (Figure 1) is hidden from the wind and from your

eyes. But when correctly assembled and adjusted, they work very well. The Speed Concept

brakes use wedge/roller actuation (Figure 2), so cable tension is critical.

The design of the front and rear brake design is different, so the instructions are also. Follow

the steps carefully, in order.

Figure 3. Housing (and cable) route through aerobar

for low/near and medium/near stems

To install and adjust the front brake

Place a ferrule on the end of the housing to be inserted in the aerobar.1.

Slide the housing through the aerobar (The routing varies according to the stem size; 2.

see Figure 3 or Figure 4).

continued

Figure 1. Exploded view of front brake

Figure 4. Housing route through aerobar for all stems

except low/near and medium/near

Figure 2. Wedge between rollers

Wedge

Arm with

roller

Cover

attachment

screws

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

No comments

Bontrager SPEED LIMIT ROAD BRAKESETS Owner's Manual Page 14