Bontrager Race Lite User Manual

i

62. Make sure the brake system provides adequate stopping power:• Test ride the bike • Make sure the lever can move at least 25mm (Figure 7), but can

7Limited WarrantyBontrager warrants each new Bontrager component or wheelset against defects in workmanship and materials:For the lifetime of the orig

ii

iii

ivAero Brake Levers Owner’s ManualTable of contentsRead this manual before you ride ... 1Introduction ...

1Read This Manual Before You RidePlease read this instruction manual thoroughly before using your new brake levers; it contains important safety and m

2IntroductionThe brake system allows you to slow or stop your bike, a function critical to your safety. These instructions explain how to inspect, adj

3Lubricating aero bar brake leversEvery 3 months lubricate the brake lever pivots with Wrench Force® SynLube or a similar light oil.

4Installation instructionsThe correct installation of new Bontrager brake levers is critical to the rider’s safety, so this work should be performed o

52. Tighten the expander bolt (Figure 2) until the lever is secure, or to a maximum of 60 Lb•in (6.7 N•m).Make sure the lever is easy to reach when in